2005 Ford Ranger "egr valve" Questions

Ad

Question about Ford Ranger

3 Answers

...EGR valve code. The truck is a 5 speed without an egr valve. I cleared the codes many times and it just comes back. what gives? Fault code 33 means that the exhaust gas that flows into the upper ...

Ad

Question about Ford Ranger

2 Answers

...egr valve problen rather the sensor has i mentioned . The part runs about $ 65:) P0403 EGR Circuit Malfunction Hi. you will need to replace the EGR Valve component asap. The Circuit has failed. ((It ...

Ad

Question about Ford Ranger

2 Answers

EGR valve off, cleaned it, put it back on, tested it and it passed. But the computer says I still have a problem with the EGR. So I decided to replace the EGR vaccuum selanoid and it dint help at all.

...EGR Valve What To Do The DPFE Stands For (Delta Pressure Feedback EGR Sensor) It Messures Pressure In The EGR System And Tell The ECM Weither To Open Or Close The EGR Valve Check for vacuum leaks on ...

...egr valve has two sensors. One is an EGR position sensor which is physically attached to the EGR valve. The other sensor is the DPFE (Delta Pressure Feedback EGR) sensor, commonly called the EGR ...

...EGR valve. The exact location varies depending on the engine (2.5L, 3.0L or 4.0L). It is usually attached to the upper intake manifold with two small bolts. Look on the top of the engine. The EGR ...

Question about Ford Ranger

1 Answer

egr valve were is the egr valve in a 1993 ford ranger 4.0 liter i cant find it The EGR Valve is #4: Please don't forget to rate!

Question about Ford Ranger

1 Answer

...egr valve i cant find the egr valve in my 1993 ford ranger 4.0 liter i have looked at diagrams and i still cant find it please help driver side front of intake hidden by black plastic cover look for ...

EGR valve twice in 6 months. What is causing the EGR valve to fail so frequently? This has a 3 liter V-6, automatic. The problem is now most likely a clogged port in the Intake manifold. In the region

...egr valve and solonoid the iac valve the pressure solonoid plugs wires cleaned the tube for the egr and throttle body passages and still get the code it wont idle without dying and i have no power on ...

Not finding what you are looking for?
2005 Ford Ranger Logo

469 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...