1993 Pontiac Grand Am "bent subframe car" Questions

...bent wheel. Also feel the tread as you rotate the tire. It should be smooth and concentric. If there are any bulges in the tread the tire is seperated. Grab the wheel at the top and bottom and ...

...SUBFRAME BENT ALL DRIVE TRAIN AND FRONT SUSPENSION COMPONENTS GOING TO BE KNOCKED OUT OF LINE. If you mean the torque from the acceleration then No. Usually if the front-end is shaking at higher ...

bent sub frame - what is the cost to replace it? CHEAPER BUY WHOLE CAR AT SALVAGE YARD USE THE SUBFRAME.SUBFRAME CAN BE WELDED AND REPLACE IN SECTIONS BUT YOU WILL HAVE TIRE ALIGNMENT PROBLEMS.YOU CAN

...it hard to change a bent subframe on a 2001 mercedes e320 4matic wagon front passager side subframe All it takes is money and a good frame shop. Anything can be done if you are willing to pay for

...;leaking will also cause rust in steel. so bad that it failed and inspection then the answer is to get a subframe from the wreckers ( good frame not rusted or bent) and have it fitted to the

...rack and pinon and the motor mounts, but make sure that when you put the subframe back together it linds up right and it is not bent or twisted. because if it is it will happen again and again. ...

...bent, upon attempting to remove the control arm the front 4" fastener bolt will turn but not screw out or tighten back in. Is there a nested nut on the inside the subframe housing that may have broke ...

...bent subframe is it worth buying subframe If it can be repaired, it might require the use of specialty frame machine, and it may be difficult to find a shop or dealer with the proper equipment. I ...

My 1974 dodge dart will not hold a front end alignment worn bushes,loose bolts,suspension joints worn,bent chassis or subframe

...rear passage tire leans outward from the top whats to cause of it Sounds like a bent control arm or strut. I’d check the lower control arm bushings and if they are ok check for rusted out