1999 Mazda 626 "keep blowing fuse reverse lights" Questions

...keep blowing there's a wire somewhere on the car that has contact with the frame so everytime you put your car on reverse the 12V wire shortcut on the frame so the fuse blow check all your positive ...

...keep blowing fuse on 2002 ford sport track You have to isolate the wiring harness that goes to the reverse light. Somewhere in that path a chafed or bare wire is grounding out and blowing your fuse ...

keep blowing fuses when i put it in reverse replaced turn signal switch and neutral saftey switch along with the circuit boards in the taillights checked the wiring from front to back You can rule out

keep from touching any metal), remove bulbs from sockets, CAREFULLY INSPECT sockets and wires. New fuse of correct rating. Turn key on and try again in reverse. Fuse still blows: Next place to look is

keep blowing! bulbs are good when checking wires by light bulbs I noticed that the backup lights where hooked to the taillights is this normal!? no reverse lights get power from a reversing switch and

...blowing the fuse. dash selector just blinks the trans case keeps blowing fuses. i replaced the selector switch that is on top of the trans case but didn't help Is there any other affected circuit ? ...

blowing 10 amp fuse for reverse lights.changed brake pedal switch didn't help of course changing a brake pedal switch will not help in a reversing light problem they are two totally different circuits

keep blowing fuse for backup lights on truck just going by reverse going to dr it blows Loose wire or microswitch that is shorting to ground. It should be somewhere near the shift lever base pivot ...

...KEEP BLOWING FUSE, I CHANGED FEW TIMES AND DRIVE FOR 10 TO 20 MINUTES AND BLOWS THE REVERSE LIGHT FUSE.CAN ANY ONE HELP,,THANKYOU id say you have a chaffed wire in your harness somewhere if you dont ...