1999 Mazda 626 "cuts" Questions

I lost my key and i have to cut a new one. I need the key code for cutting a new one and how to programme it. Thank you no programming that one, get your VIN and title or registration, stop at a mazda

Car starts fine then immediately cuts out I have a Mazda Tribute 2002. Over the last couple of months I've had trouble starting my car, it turns over fine but then the revs drop and it cuts out, I've ...

All the power cuts out and the car dies. Prior to this all the gauges will flicker and lights on the dash will go off. All of the gauges on the dash will flicker and then eventually cut out. Finally ...

Is there a way to cut an access panel on a 98 Mazda 626 to the fuel pump so I don't have to drop the fuel tank? I have 3/4 of a tank of gas in there and my dad isn't supposed to lift that much and I'm

My 2000 mazda 626 cranked on its own can't found problem to it cut-off Hello your starter relay switch look under hood at the power distribution box beside battery open see diagram for relay remove ...

my1999 madza 626 idles rough when its in drive or when i cut on my 1999 madza idles rough when its in drive or when i cut on the ac this could be a case of carbon debris in the throttle body plates ...

When i shut off car fan still stays running. i have 2000 mazda 626 Hello, this was common in some vehicles, the fan would cool down the motor and than cut out when the vehicle was switched off. It was

was loping in drive, would have to put in neutral, now stalling in neutral, at first i thoght it was the fuel injector, not sure engine runs smooth if giving more than idle pressure. It is when the ...

...car stalls.happens every so often ? I have a 1997 626 2.0L 5speed when im driven it like rev limits cuts out around 3500-4000rpm, and when i rev it up and past 4000rpm it stalls, anyone have a idea ...

Vehicle cuts out while driving Car cuts out while driving and re-sets the clock Check for good grounds from battery to engine and such.