1993 Mazda Protege "sequence head bolts tightened" Questions

...sequence Cylinder head bolt tightening procedure: CYLINDER HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder head bolts. Torque: 30 Nm (22 ...

...head. Following the sequence shown below, tighten the cylinder head bolts to 40-60 Nm (30-44 lb-ft). Loosen all cylinder head bolts approximately two turns, then retighten the cylinder head bolts to ...

to 65 ft-lbs or whatever is recommended for your car. Tightening in order/sequence pulls the cylinder head evenly onto the block. Waiting 2 minutes between stages allows a 'stretched' bolt to 'settle'

head torque sequence, 260, 307, 350 403 Oldsmobile built engines On the V8, tighten the bolts, in the sequence illustrated, to 100 ft. lbs. When all bolts have been tightened to this figure, begin the

...sequence, head bolts 1-6 to 26 ft. lbs. (35 Nm), 7-8 to 15 ft. lbs. (20 Nm) and 9-10 to 22 ft. lbs. (30 Nm). Step 2 - Tighten all head bolts, in sequence, an additional 90°using J 36660 or ...

head bolts in sequence according to the following procedure CAUTION During the final tightening sequence, bolt No.11 will be tightened to a lower torque than the rest of the bolts. DO NOT over tighten

head bolts. Apply a coat of engine oil to washers and bolt threads. Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft. lbs.) in alphabetical sequence. Then tighten all bolts to 69 Nm (7.0 kg-m, 51 ft. lbs.)

...head bolt torque sequence (click over pic for zoom) Apply sealing compound only to the cylinder head gasket. Do not allow sealing compound to enter the cylinder bore. Install the cylinder head and ...

...head bolts?(1-10) in sequence to 30?Y (22?lb?ft). Use the J 45059 to rotate the cylinder head bolts?(1-10) in sequence an additional 155?degrees. Tighten the (2?short) end bolts?(12-13) to 7?Y ...

...100 ft LBS #5 BOLT 8 TO 10 AT 110 FT LBS . HEAD TIGHTEN SEQUENCE - standing at front ofcar bolts down left side are 8/4/1/5/9 bolts down right side are 7/3/2/6/10. left side meaning distributor