1993 Mazda Protege "reversing switch" Questions

How to replace knock senor switch on 2002 mazda protege 5 how to replace knock senor switch on 2002 mazda protege 5 Removal & Installation Disconnect the negative battery cable. Remove the intake ...

can't get the back up light to work(electrical problem)i think I believe there is a switch on the transmission shift lever. Does the light ever come on when you move the lever back and forth slowly ...

is there a fuse for the backup light because mine are not turning on and they are brand new ..! So both your backup bulbs are new... I would think that the reverse switch on the side of the ...

brake lights will not turn off Sounds like your brake lamp switch is stuck. Brake lamp switch should take care of your issue. Cost under $25 bucks and is located on brake pedal. Not very hard at all ...

...switch? The circuit usually operates by reversing polarity for window motors so either your switch is bad (try a different one) or you have a wire between the switch and the motor that is shorted to ...

Hi i have a 1995 mazda 1.8 auto protege when i select drive or reverse the motor at idle almost cuts out or some times cuts out it dose not cot out if you turn the aircon on so it seems to me that the

How do I know when to replace the clutch on my 1999 Mazda Protege ES. Currently, it works, but I have to press the pedal all the way to the floor, with some force, to start the car. No check engine ...

Hi, i have 1991 mazda protege. I accidentally broke my key in the ignition lock and now i was wondering how do you take off the ignition lock cylinder? p.s key was pretty worn down already Ignition ...

NO REVERSE LIGHTS REAR PARK SENSOR WHEN REVERSE SELECTED E320CDI WHEN IN REVERSE NOLIGHTS PARKTRONIC AND NEARSIDE MIRROR NOT MOVEING. CAR REVERSES AND DRIVES NORMALLY. THOUGHT IT MAYBE REVERSE SWITCH ...

reversing light not working Possible that the trigger switch connection from the reverse gear switch is faulty. You need to check the voltage at the reverse gear switch. If absent the switch must be ...