2004 GMC Yukon "blend door fix drivers side" Questions

...blend door actuator? How do you fix the driver side air blend door actuator on a 2003 Yukon? I believe this might be my problem...SOMETIMES the air blowing out of the driver's side vents is hot. By ...

...FIX-- your blend door actuator has a grease drip inside on a sensor. It's a easy fix. I just fixed mine in 20 minutes. See how to here==> ...

...blend door, it controls air tmerature, it may be defective or the electric motor that moves it.. https://youtu.be/WWnjTwIK4OA Watch this video because it worked for me my passenger side was blowing ...

...Blend Door Actuator has failed. The Vehicle also has a Left-hand Blend Door Actuator, but that seems ok. Operating the mode select switch and/or lubricating the RH (passenger side) Blend Door, or the ...

blend door on 2010 dodge nitro? very minimal heat, the air blows but very little heat comes out I would pull off the blend door actuator and swap it out with a new one. Or another option is to swap it

...blend door or blend door motor actuator problem, it can also be the climate control module in the dash, 1st try disconnecting the battery for 5 min's to re-sync the climate control module, if this ...

...blend door is not moving due a failure of the door or its actuator motor. 2005 Acura TSX passenger side blows cold AC, Driver side blows luke warm air. So I ran the self diagnostic test, no errors. I ...

blend door and when it fails it usually moves the door all the way to the "hot" position. Sometimes if you shut the vehicle off for a bit then restart it the system will work fine for a while then the

...can I fix this? try disconnecting the battery to re sync the two temperature control blend doors, if that doesn't work u will need to replace the control head or the drivers side blend door

blend door actuator independent of the driver and passenger side the actuator control the blend door. It seems in this case the actuator is intermittently moving from cool to heat but tries to correct