2003 GMC Envoy "abs light comes driving 2008" Questions

...abs light. This happened after my friend was driving down the freeway and his tire blew. Now it just blew the rubber off and he was able to drive t off the freeway on the belts. And the school did an ...

abs light is on and 4wd light comes on and off 2006 Mazda Tribute, ABS braking lights on,Why? While driving the ABS light comes on and stays on and when I apply the brakes it kinds of shakes a bit. ...

...abs light staying on whilst driving car driving fine but after about 20 mins the abs light on the dash comes on and stays on. ABS I'd first have it checked I'd say it's a faulty ABS sensor hope this ...

...abs is passing the self check when you turn on the key. When th e light comes on after you start moving it usually means that a sensor is not sending a single or a signal is messed up. A scan tool ...

...abs light on in 2009 ford transit how do i eliminate them Anti lock brake system light comes up when there is issue with car brake systems.It can be low brake fluid or faulty ABS fuse or its issue ...

...light and abs light come on. This happened in a previous snowstorm as well, but the dealer couldn't find any problem, and no code was entered in the computer. Obviously, I don't want to drive if I ...

...abs light staying on stability control and abs lights come on and stay on - if i start the vehicle with pressure on brake pedal the warning lights come on hen i relaese he brake again? car is sensing ...

Light. the first time they came on is when we were going down the road at 70mph. and have been coming one ever sense. sometimes they arent on when we start driving then they come on later then go off.

...ABS light comes on sometimes right away when started other times after 10-15 min. or longer into my drive. The Car seems to be running fine other than the lights coming on. I've checked my ...

...ABS light won't go out Could be a bad ABS sensor I even had a section of wire where the ABS wire comes out by the wheel that was dirty and corroded. They put a new connector in and cleaned the other ...