2003 Ford Crown Victoria "radio antenna" Questions

...radio antenna. The antenna is located in a pretty hostile environment due to salt, dirt etc. A good spraying of silicone spray (safe for plastics) on the underside of the antenna mount and a careful ...

radio, or else the antenna wire is damaged somewhere in between the radio and the rear window. You'll have to pull it out and inspect it. Assuming they were referring to the power antenna (if your car

...radio is plugged in correctly to the back of my stereo. I think I may have a problem with the rear window antenna. Second, I have an issue with installing the setina push bar that came with my car. I ...

antenna is hooked up in the back of your radio... there is a tool to remove the factory radio pretty easily. called a DIN radio removal tool. Hopefully its loose or disconnected- that would be an easy

...Radio Illumination Wire: Light Blue/Red Car Stereo Antenna Trigger: Blue Left Front Speaker Positive Wire (+): Orange/Light Green Left Front Speaker Negative Wire (-): Light Blue/White Right Front ...

...radio. It could be the scan button is shorted or if it doesn't pick up stations, a problem with the antenna or receiver. The thermal modulators are misconfigured remove the thermal semiconductors and ...

...Radio Illumination Wire: Blue/Red Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: N/A Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: 5 ...

...radio in my 94 crown vic that i just had installed, however after 2days we couldnt figure out the problem with it. it lights up, illuminates, but theres nothing on the display or anything going on ...

...radio on antenna should push up and play out he cable to replace insert new cable and turn radio off it will draw cable in and antenna tighten washer nut and your dne The antenna is set to go up when ...

RADIO-B fuse as antenna doesn't work and may be causing a battery drain. Any ideas If your unit has digital display as most do now, RADIO-B will supply constant power to power the units memory