2001 Chevrolet Prizm "ignition lock" Questions

...Its going to be inside the steering column near the ignition switch. When you turn the ignition it unlocks the steering lock. You can't really manually unlock it unless you break the lock ...

...you have warn tumblers in the ignition. look at your key. the edges are all rounded off. a good lock smith will be able to key your ignition with the key that fits your car door hope this helps you ...

KEY IN IGNITION TURNS, BUT STOPS HALFWAY BETWEEN OFF AND ACCESSORY. CANNOT REMOVE IGNITION TO REPLACE. you will have to cut the steering lock off then and replace the whole unit

...ignition lock cylinder This may or may not help,but i found thisREMOVE OR DISCONNECT1. Disable the SIR System.2. Battery negative cable.3. Knee bolster and IP steering column reinforcement. NOTICE: ...

...ignition key lock on my 95 geo prism is very loose inside so I cannot put it in accounting mode to pull cylinder out. What should I do? it needs a new total lock assumbly, or a new cylinder, the ...

...ignition lock cylinder out? Where do I purchase a new one and how much should I expect to pay? Do I need special tools to remove the old one? Could you direct me to a pdf file that would have a step ...

...lock out is dead. the park , will fail if the ignition power key fails. for spark power. the release needs 2 thinks, brakes applied and ignition power, this activate the shifter unlock solenoid. the ...

how to replace ignition cylinder? Thing is you'll need the old key to get it out. get a paperclip too. You should see a tiny hole in the ignition switch. insert the paper clip. You should take the ...

ignition switch there are 3 sections in the FSM covering this topic, short and sweet remove lock cylinder, (lock smith) steps. remove only the switch section. remove the whole thing. which one is you.

...a tumbler inside the ignition lock gets worn or bent in the slightest it will hinder the ability to remove the key from the lock cylinder. A new replacement will be needed for they are not ...