2001 Chevrolet Prizm "ignition" Questions

how to replace ignition lock cylinder This may or may not help,but i found thisREMOVE OR DISCONNECT1. Disable the SIR System.2. Battery negative cable.3. Knee bolster and IP steering column ...

...up to machine for check engine light and found out about the sensor. The other code was 14 no ignition reference signal. Guy a shop doeant know what that means. My car takes a long to crank

spark plugs wont spark car wont start ignition coil and the ignitor assembly within the distributor. The ignitor assembly grounds the ignition coil at a frequency to saturate and trigger the ignition ...

Auto Ignition Starting Proble 1995 Geo Prism Lsi 1.8L ignition starting hesitation. Starter solinode picks up or clicks but does not turn the starter. Moving automatic transmission shift lever from P ...

...hood and it only starts after i turn the key a few times.............HELP Sounds like you need an ignition. Turn your key to the on position and cross the terminals on your starter with a ...

I'm working on a 97 geo prizm and need to find the ignition relay,I rplaced the ignition switch and have no power getting to the switch,there is power at the harness and I can bypass the switch an

no power to ignition switch Replaced ignition switch,Yet I have no power to switch,can bypass at switch harness and start vehicle but when switch is pluged back into harness have no power to switch ...

I go to start the car and it won't start have to play around with ignition and then it will start, has nothing to do with the battery. Does this mean that I need a whole new starter or is it just the ...

key won't turn and sometimes gets stuck in 97 geo prizm. does this mean the whole ignition switch needs to be replaced, or just the lock cylinder? yea it sounds like you have warn tumblers in the ...

Lost the keys to the car want to know how to remove the ignition without breaking it to put another ignition in. Unable to get key made up because ignition has already been changed so the vin number ...