1999 Chevrolet K1500 "properly remove manifold gauges unit" Questions

Ad

...manifold. 2 immediate things to try........ 1. Replace the thermostate (about 6 dollars). If you drive the car to an Autozone for the thermostate purchase, they will show you where it is located and ...

Ad

...Remove the factory sending unit located on the front right side of the lower manifold (your right side facing engine) and screw the water temp send unit. Make sure you wrap the connector with Teflon ...

Ad

Question about Honda Cars & Trucks

2 Answers

...properly or if it is faulty Fuel Filter Removal & Installation To Remove: Remove fuel tank unit beneath floor access panel. Remove fuel filter from fuel pump/fuel gauge sending unit. To Install: ...

...properly installed and aligned, or if it cannot be located within the unit itself. Disconnect the stop lamp switch wiring to prevent running the battery down. Support the master cylinder from the ...

...manifold, mounted in block. HOME / REPAIR HELP / 1995 CHEVROLET TRUCK C1500 1/2 TON P/U 2WD 5.7L TBI 8CYL REPAIR GUIDE / ENGINE ELECTRICAL / SENDING UNITS AND SENSORS / OIL PRESSURE SENDER OPERATION ...

Question about Chevrolet 1500

2 Answers

properly, only goes to lowest heat (100 degrees). I've replaced the thermostat (original) but problem still exists. Are there any sensors I could prossibly try replacing? The AC and heat seems to work

...remove any debris with a stiff bristle brush or hose.REFRIGERANT LEVEL CHECKSSee Figures 1 and 2Factory installed Toyota air conditioners have a sight glass for checking the refrigerant charge. The ...

Question about Chevrolet 1500

1 Answer

...properly connected and that all of its terminals are straight, tight and free of corrosion. With the ignition ON , check the voltage between terminals A and B (probe the back of the connector to ...

Question about Chevrolet 1500

3 Answers

...properly, as soon as the car is cranked the pump will move enough coolant through the head to drop the temp very quickly. Joe One make sure the thermostat is installed with the spring inside the ...

...remove it--it ruins the threads in the manifold. sometimes you can repair them with a thread chaser--somrtimes it needs anew manifold--ooppss! Hope I helped. Thanks you can get the required part at ...

Not finding what you are looking for?
1999 Chevrolet K1500 Logo

657 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...