1997 Chevrolet S-10 Pickup "water pump bolts" Questions

...water pump on 96 chevy S10, Water PumpRemoval & Installation2.2L EngineTo Remove: Drain the cooling system. Remove fan assembly. Loosen the water pump pulley bolts. Remove or disconnect the ...

...water pump? How do I replace the water pump in my 1998 Chevrolet S10 Pickup? PLEASE DON'T FORGET TO RATE!!!! After removing the cooling fan assembly, remove the water pump pulley-4.3L engine Location ...

water pump To replace water pump on Chevrolet s-10. You need take of the top half of the fan shroud, pop off the hoses to the water pump and the take out the bolts to the water pump.To get the fan off

...water pump on a 1998 s-10 the bolys wont budge and they seem to have a shallow head on them IF you are working on a 4 cylinder engine (2.2L), and if you have taken off all the preliminary stuff (fan, ...

...water pump on 97 chevy s-10 there seems to be a leak on the backside of the water pump on my 97 chevy s-10 with a 3.0 v-6. I was wondering if there is a gasket on the backside that may be leaking? ...

...water pump 1st remove the shroud for access disconnect the + terminal on the battery remove the bolts and brackets that surround the pump and anything you may need to unplug to gain access to it ...

...water pump. Install a puller tool such as J-25034, or equivalent onto the power steering pump pulley. While holding the pilot bolt, turn the tool nut counterclockwise in order to press the drive ...

...water pump but first I need to find it how do I find and change it? the water pump is located behind the fan. take the fan and belts off and there should be about three or four bolts holding the pump ...

...water pump. The repair manuel show a different clutch, the one that just bolts on. Mine has a shaft running from the water pump to the clutch autozone has a simple diagram but it serves your ...

...water pump taking off fan assembly off water pump? I took the four 13mm bolt off and the fan cluch will note come off. spray lube,wd40 rustbuster etc between where pulley and clutch meet the clutch ...