1997 Chevrolet S-10 Pickup "light switch" Questions

Ad

Question about Chevrolet S 10

2 Answers

...light switch? ground to the brake light assembly? were the sockets melted at all? sometimes they will deform from heat- you can usually pry the contacts out a bit to make contact with the light bulb. ...

Ad

Question about Chevrolet S 10

2 Answers

...light switch itself has shorted out in the on position. I would try to chase the wires first and if you do not see anywhere that they were messed with, then try a new switch. (check if your tail ...

Ad

...LIGHT SWITCH ON THE BRAKE PEDAL FOR POWER IN & OUT WHEN ON THE BRAKE.IF IT IS OK U MANY HAVE A PROBLEM WITH THE TURN SIGNAL SWITCH.POWER GOES THROUGH THE SWITHC TO THE REAR LIGHTS.WIGGLE THE TURN ...

Question about Chevrolet S 10

1 Answer

light switch. Can also hear relays clicking when depressing the brake pedal but stop lights just don;t work OK try this, push and hold brake then push on the hazard switch if brake lights come on then

Question about Chevrolet S 10

3 Answers

...the brake lights. Above the pedal on the brake is a switch that has to make to illuminate the brake lights. test brake light stop switch at brake pedal arm, see if power there.may be bad brake

...light switch (both the instrument pannel and the running lights run off of) and nothing happend.. i sent it back thinking its a defective switch.. well i got that one replaced and it didnt work ...

light switch or blown fuse. Do you have orange signal lights and red brake lights at the rear? Then the signal light switch will not affect the brake lights.....but.... If they are all red and you use

...light switch is located is located under the dash, at top of the brake peddle. To test the sw, use a 12v test light check for constant power out of the switch, with nothing else on. If there's pwr. ...

Question about Chevrolet S 10

3 Answers

...light switch and test for power going into the switch if you have power put your tester on the other wire on the brake light switch and press the brake pedal, If there is power the switch is good and ...

Question about Chevrolet S 10

1 Answer

...light switch pulled on the high beam indicator light goes out which is opposite of what it should do. This problem appears to be temperature related as all lights and gauges will begin to work ...

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

1,150 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...