1997 Chevrolet S-10 Pickup "bleed clutch" Questions

Ad

Question about Chevrolet S 10

1 Answer

...clutch to bleed on 1996 s 10 we have bleed bleed and bleed Hi if you have done the following to bleed the clutch. 1 open bleed screw 2 push pedal to floor and keep on floor 3 do bleed screw up 4 lift ...

Ad

...on the slave cyl. Allow fluid to drip into an open can until there's no trace of air. Close bleed valve and try clutch. If still no pedal, repeat the process. This is quite an acceptable

Ad

...clutch slave cylinder. It does take a good couple hours to bleed one of these using the conventional two person method so it could still need bleeding but if it is taking to long and your initial ...

Question about Chevrolet S 10

2 Answers

...clutch!?Can anyone help? I've been trying to bleed the cluthc for days.I can't get the air out.No pedal.Replaced the master cylinder. This is what I would do. Fill the master with brake fluid. Make ...

Question about Chevrolet S 10

2 Answers

...bleed hydraulic clutch on this truck but am not sure of procedure. Where do I begin and how do I go about this. Thank !! well you will need some help make sure the resivor is full and have someone ...

Question about Chevrolet S 10

1 Answer

...clutch 85 s10 blazer when I bleed the slave cylinder oil leaks out the bell housing First, unless you have just done some clutch work you should not need to be bleeding the clutch hydraulic ...

i replaced the slave cylinder on the clutch but cannot get it to bleed. to bleed have the engine off and press the clutch in 25 times

Question about Chevrolet S 10

2 Answers

...bleed clutch on a 1989 S-15. The manual claims removing/ tilting the slave will remove air- but the short hard line used clued me to try another idea. I took a small windshield washer motor and ...

Question about Chevrolet S 10

1 Answer

...clutch when i tried to bleed it according to the manual, (the clutch has already been replaced) this is happening more and more = pump the padel 100 times then bleed then maybe nesassry to pump 100 ...

...clutch fluid reservoir, make sure the bleed nipple on the slave cylinder is tightly closed. Now, with the piece of wood within reach, slowly depress the clutch pedal with your hand and hold it down ...

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

1,150 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...