water trap,on the pre fuel filter on it's top there is a feed pump for the diesel ,now what you must do is to see for the diesel hoses ,follow it ,you will find inlet and outlet for the hoses,you must
Question about Cars & Trucks
...water trap filter to hyundi terrican 2004 2.9 diesel you can fit or have fitted any number of water traps to the vehicle what you have to ask yourself is why am I getting so much water in the ...
Question about Cars & Trucks
...you got old fuel, or bought bad fuel if possible water in fuel tank buy a bottle of heat this will remove water from fuel tank, replace fuel filter if one or drain moisture trap on engine fuel
...water trap for good reason, It wouldn't hurt to just change the filter and add a fuel drying agent to get the water out of you system. If you have a lot of very cold weather where you live it is best ...
Question about Cars & Trucks
...the sediment trap. Water can cause major damage to the injection system and the engine. Also check all pipes to be sure there are no cracks. Next step is to have the injectors attended to. Regards ...
Question about Nissan Cars & Trucks
...water trap in filters full of water, well clean it. fuel gauge sender bad? or the IPCluster 12v regulator in cluster bad. but if reg is bad all gauges will surge as RPM rise and fall. 2 fuel line ...
...water in gas. hey Carl, I would recommend replacing the fuel filter if you have not already done so. Even though you have run dry gas through the system, the filter has dessicant element that traps ...
the tank is to remove it and turn it over. Unleaded fuel will wreck a diesel engine in no time . drain it all out ,replace fuel filters ,clean out any water traps fill with diesel and bleed the system
...water trap to separate the water from the fuel. It is getting full of water and needs to be drained before it begins to let water back into the fuel system. If that happens, your engine will run very ...
...water separater Depress the fuel primer 20 consecutive times then open the bleeder screw on top of the housing to dispel trapped air. Close the bleeder screw and continue the step above until the ...
425 questions posted
Usually answered in minutes!
550 Questions
469 Questions
461 Questions
355 Questions
338 Questions