1998 Pontiac Sunfire "98 head cylinder" Questions

...98 cadillac deville in time im puting head gaskets on my 1998 cadillac deville with the northstar v8 and i need to know how to put the car back in time when i put the heads back on Take a finger and ...

98 pontiac sunfire. The temperature gage still doesn't work so we retested the code to make sure that it said the coolant sensor and it did. So we took out the sensor and had it checked and it is fine

...head problem... The rest is up to you! I had a similar problem with a 98 sunfire 2.4l. The first thing I did was check to see if the fan was running, and it was, but it seemed to be coming on and off ...

98 Accord , "4 cylinder" that continues to overheat. I have tested the cooling fans, relay switches, replaced the waterpump and radiator, and cap, upper & lower hoses and thought I have vented the

head Bolts all step 1 = 88-98 Nm, 65-72 lb.ft 147 mm, 5.8 inch bolts step 2 = 85-95° 119 mm, 4.7 inch bolts step 2 = 70-80° Cylinder head Sub Bolts step 1 = 34 Nm, 25 lb.ft step 2 = 44-54 Nm, 33-40 lb

...head bolts and torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees ...

head bolts and torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees clockwise. Step 5: plus 90

...head on '98 volvo 940.Coolant keeps Just changed cylinder head on my '98 volvo 940 turbo 2.3litre.Coolant keeps running low (max-min in a day)with no visible leaks.What;s going on? hugo. If you have ...

98 grand caravan wont start after overheating and antifreeze is spewing ot of radiator whe the cap is off Looks like damaged cylinder head gasket is damaged..may be the cylinder head is damaged too. I

...98 1.8L (VIN M) engines Install the cylinder head using a new head gasket. Tighten head bolts to proper torque specification in sequence. 2.0L (VIN F) and 1996-98 1.8L (VIN M) engines-Tighten M10 ...