2004 Nissan Titan "cam sensor" Questions

...cam position sensor. You will need to replace the sensor, this is a common type of problem and make sure the engine oil is clean and full before you replace it because this can also set the codes.You ...

...if veh have malfuntion ligth on may be is the cranck possition sensor or the cam sensor, olso if there is no codes is the IPDM ir intelylled power distribution module veh will cut off when ...

I noticed that my "SLIP" indicator light came on tonight. I have a 2006 Nissan Titan LE. Is this common? What is most likely the problem? Top off your fluids including brake fluid and power steering ...

...Cam Position sensor or Crank Position sensor but you would have a check engine light if either of those conditions existed. Its most likely one of two possible causes. It could be the IPDM box's ECU ...

If there is pressure,then you have to read trouble codes,perhaps there are some problems with crank/cam shaft position sensors.You will need scan tool for this

...cam position sensor is not responding/relaying a signal. without looking through your engine, I would guess that it is probably an injector problem, or maybe a clogged fuel line which would not ...

cam sensor what is cam sensor The Cam sensor is used for fuel control you have cam position sensor one on the exhaust and one for the intake.The use of a cam sensor improves mixture for each ...

...cam crank sensor on 2004 Audi A4 The "cam crank" sensor is the "reader" for position and speed of the camshaft. This sensor send informations to Engine Control Unit about camshaft position and speed. ...

cam sensor error changed sensor turns over but won't start. Had a cam sensor error code a few days ago. Changed cam sensor and still same problem. You may have jumped time,since the cam sensor did not

...cam or sensor Could you explain how it could be a bad cam or cam sensor? Check this out.. The cam sensor wires and the Ignition coil wires CAN interchange.. If you reverse them.. It'll blow the ecm.. ...