...on top dead center rockers are rocking and the mark on the harmonick balancer shows marks on top dead center and the over head cam has a mark on it to lines up with a mark on the timing cover
timing marks for 1992 nissan D21 SE D21 SE 4 wheel drive crankshaft timing marks Here's a link to the 6 cylinder timing belt marks.Here'a a link to the 2.4 engine with timing chain.
...out valve cover,timing mark is on the camshaft gear,the mark will be highlighted in white paint,that mark needs to be aligned with the edge of the head,and bottom timing mark is on the crank ...
...if its a 2.6 4 cyl. set the crank pin up.....there is a keyway.....set cam mark down.....ready to fire on number 1....if u set cam mark to up position it will be ready to fire n number 4 hope ths ...
...timing mark on cam gear (arrow) aligns with mark on upper camshaft cover (notch). See Fig. 2. NOTE: When timing marks are aligned as stated above, No. 4 piston is at TDC on compression stroke. 2) ...
Question about Nissan Pickup
timing lamp, but I don't know the right mark, it says 10 degrees BTDC. The pulley has 6 marks, which one is the right one? the mark to the right of the pully will be 0 .. it will be like this. 8 6 4 2
...mark on the tbottom of the timing belt cover Hi. The older style engines had a metal arrow on the front timing cover. The newer ones may have a small raised area on the timing cover. It might be best ...
Question about Nissan Pickup
...timing mark on cam gear (arrow) aligns with mark on upper camshaft cover (notch). See Fig. 2. NOTE: When timing marks are aligned as stated above, No. 4 piston is at TDC on compression stroke. 2) ...
...timing belt clearly next remove the valve cover to see valves. Rotate the engine by hand you can see where you remove the engine bully key grove that key should be top side while you rotating the ...
Question about Nissan Pickup
...Timing marks are off. Get access to the crank mark and cam marks. Make sure they are in the right position. Reset them , turn the crank two revolutions by hand and make sure they are still lined up. ...
453 questions posted
Usually answered in minutes!
829 Questions
564 Questions
428 Questions
367 Questions
319 Questions