1991 Nissan 300ZX "replace serpentine belt pulley bearing" Questions

...serpentine belt and still i hear a wheel that the belt goes around. what is that wheel called and should i replace it. it doesnt sound like it did before i replaced the belt but like the wheel is ...

...belt. Serpentine belts can become very noisy and often owners think a pulley has failed when in fact the serpentine belt is worn and needs replacing. 2. If you remove the serpentine belt from the ...

replace serpentine belt 96 town & country, also does the tensioner ever freeze up? Any bearing mounted pulley can "freeze" if a bearing wears out. The most common result it it can burn up a belt ...

...replace the serpentine belt b/c it is worn and has cracks. I just replaced the serpentine pulley with a new one becuse it's bearing was bad. Now I need to replace, what I believe to be pulley that ...

...serpentine) belt is self-tensioning by means of a tensioning pulley. Excessive play means that the current belt is spent and must be replaced. It is a very good idea to replace the idler pulley above ...

...What could have caused this and what will it take to fix it? These pulleys have sealed bearings but they don't last forever. Buy a new one and replace it before you break your serpentine

...replace it? The idle pulley is the device that you move to take the serpentine belt off and on. The bearing is the Ford alternator bearing, but you will have to press it on and off the pulley (wheel ...

...attention to the automatic tensioner pulley and arm and the idler pulley's Replace serpentine belt if you haven't done so. Otherwise, one of the pulleys could be bent and wearing the belt

...serpentine belt on wife’s 96 Grand Voyager. Idler was making a lot of noise (98K on the car). I did this following the instructions below. Now have a louder shrill that coincides with the RPM’s. It ...

...belt. A/C, Alternator and Serpentine belts have been replaced. It squeals for a few minutes at start up, then quiets. It also squeals when running the A/C. Any ideas? I would check belt tension and ...