1987 Nissan 300ZX "car headlights work main beam" Questions

work on low beam only,replace with ner bulb but problem still exist Hi, Looks like the headlight relay problem or the main switch. Check the headlight relay by interchanging similar relay on the relay

...car. I bielive it to be a electrical problem, its starts with the a/c cutting off periodically, now my low beam headlights wont work but high beams are , and unusual dimming of the lights inside and ...

main beam is not working Switch on main beam - the nearside headlight comes on but the main beam does not All other lights and fuses have been tested and working fine Any ideas? change the sealed beam

car is it? your main beams gone, put your headlights on put on high beam take a look at headlights take note where lights emit from then change back to main beam then check headlights again note which

...headlights. There is an extra light for the main beam to work seperate than having the dipped, driving light and main beam all on 1 loom, it should work so the dipped and driving light are on one ...

Main beam headlights are not working, only the low beams. The fuses are okay. Question edited for clarity. Perhaps it is the relay. Did you check the bulbs with a meter or wire to the battery? https:/

...car and headlights having very low intensity and the main beam works well. If you pull the switch there is lights from the bottom lights. How to intensify the main beam. The switch saying 1-4 doesnt ...

There is also a low beam and a high beam relay in PDC as well. If no headlights work I would check for main switch or multifuction switch (wiper/high beam) since each light has its own fuse and relay

HEADLIGHTS JUST STOPPED WORKING, SIDE AND TAIL LIGHTS OK CHANGED SWITCH ON DASH, SEALED BEAMS LOOK OK,MAIN BEAM FLASHER WORKS sealed beams look ok or are ok? verify with 12v batterie, if ok, you might

...headlights don't come on ???????? ! Is this both the high beams and low beams that do not work ? If you checked all 3 fuses with a meter ( with the headlamp in Low position for both low beam fuses or ...