...2 up the 1/4 just behind the door striker is a GREEN relay. That is the starter relay. The relay is energized by the ECM. There is a black wire with a few traces or red dots along the way which will ...
...(pin 75...#4=Green/Orange (pin100)...and #2=Violet/Yellow (pin 103)... Size restrictions on attachments do not allow me to send the entire PCM...aka...ECM pin layout to you... ...
...Green wire). Voltage should be 0.2-4.5 volts. If voltage is as specified, go to next step. If voltage is not as specified, replace MAP sensor. After repairs, clear DTC and verify MAP ...
...2 terminal No. 4 (Green wire). If voltage reading is 10-14 volts, subsitute a known-good ECM, and repeat DTC Confirmation Test (Above). If DTC does not reset, testing is complete. If voltage readings ...
...Green 2 pin Open/ECM power supply relay Note: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market. Always consult appropriate ...
...2 years but the way i drive it i can understand the trans going bad, i do alot of hunting and fishing witch i have to go down muddy back road and is my everyday driver. ive rebuilt motor and am not ...
315 questions posted
Usually answered in minutes!
417 Questions
144 Questions
99 Questions
81 Questions
33 Questions