2000 Chevrolet Blazer "tilt slide mechanism" Questions

Ad

...slide up and down with out engaging into gear. How can I bypass the park gear so I can start it to get it to my mechanic. Paul At the bottom of the tilt steering coloum is four bolts that, sometimes, ...

Ad

...tilt open but when you slide open it only about 1/8inch and stops try a spray lubricant along the roof runner mechanism when roof in the tilt position , failing that may have to remove the roof to ...

Ad

...tilt but will not slide to open position. Dealer says the entire mechanism has to be replaced for $1500 and that the parts are not sold separately. Really? Please advise... the track is bad needs ...

...tilt but that's it .. only happened recently when took car to mechanic and now wont slide please help Are you referring to the steering column no longer telescoping in and out? What type of vehicle ...

Question about Chevrolet Blazer

1 Answer

...SLIDE roof sliding panel switch to be touched momentarily to cause the roof panel to automatically move to the fully open position. When the TILT roof sliding panel switch is rocked forward with the ...

...tilt open or slide open make a popping noise feels like is stuck could be the seal sticking or the cog on the motor is slipping. could mean the mechanism is stiff and needs freeing up ie re greasing ...

...slide and tilt roof mechanism is broken and the glass panel is standing proud where it should be flush. is this a diy fixable problem? Perhaps, but you really need to look at the repair manual. Your ...

...slide the switch forward again. neat trick: if you want to tilt the sunroof open without opening the protective cover, press up on the rear of the button (when the cover is closed) and release. the ...

...tilt down to seal in back. When sliding open and closed, it will open approx. 2/3 and close approx. 2/3. Bottom line...can't close it 100% but motor and switch seem to be OK. try giving the mechanism ...

When I repaired my loose tilt 88 sierra steering column I had a little metalic clip fell out. Do not know where in came from. It is similar to the tension clip keeping some tension on the sliding part

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

3,418 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...