1998 Chevrolet K1500 "set timing chain 4 vortec" Questions

...set timing on 1998 chevy truck 350 vortec number 1 plug wire should be pointing towards the front drivers corner . drivers side piston order is 1-3-5-7 front to back .passengers side front to back is ...

...timing cover and all seals and gaskets now the truck misses on number the number 4 6 and 8 cylinders after it warms up to normal operating tempature. REPLACED ECM,CAP,ROTAR,DIST,PLUGS,WIRES,CRANK ...

...set timing(while computer timing wire was disconnected under dashboard), ran rough / intake backfiring upon any acceleration, erratic timing, replaced timing chain = steady timing, still ran ...

...set. Operate the vehicle, with the Conditions for Setting this DTC, until the scan tool indicates the diagnostic Ran. Does the scan tool indicate the diagnostic Passed? -- Go to Step 10 Go to Step 2 ...

...set with its' mark lined up with the timing pointer of the timing chain cover, the tip of the rotor should be lined up with the "6". If not, remove the hold down bolt, raise the distributor until the ...

...timing chain and the cam shaft was thinking about buying the pro comp upgrade kit for it anyways. I desperately need help and a direction on this guys. It's been out of commission for two months due ...