...,checked crank sensor cam sensor,replaced coil,checcked coil wire ,checked power to coil,checked fuses, while cranking check with a test light that the coil is getting a signal from the ecm to
...fuel pressure at the output side of the rail. I opened the oil cap and watched the cam move while cranking the enginge & its not popping or even acting like it has any fire. its late going to try
...crank the engine do you see fuel spraying from injectors .if you dont check for power at injector connectors one side should power and the other will be ground controlled from pcm.you can test with a ...
...Crank Sensor, VSS, ECM under dash, cam sensor, map sensor.what do people think could be wrong it is getting good spark to all cylinders and it is getting good fuel. Have you had the Starter Checked ...
crank sensor. if you have a access to a scan tool, hook it up and crank the engine over, watching your live data to see if you are getting an rpm reference. if you are not, there is a problem with the
...crank position sensor and the cam position sensor signals to the ECU (engine control unit) . The cause for this are due to two possible reasons 1) the cranks sensor, its connection or wiring back to ...
crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not
...crank sensor is only an impuls unit that gives current to the coil pack.has nothing to do with the fuel system.Try changing the relay if you are getting no power to the pump and only one live ...
...crank positioning sensor , maf sensor , fuel filter and a bunch of other **** . and it keeps throwing p0120 cam positioning sensor malfunction and p0340 maf sensor low voltage . and while u read this ...
1,299 questions posted
Usually answered in minutes!
795 Questions
754 Questions
575 Questions
561 Questions
414 Questions