...with a 2.2L 4-cylinder engine is located on the front of the engine just above the starter near the oil pressure sending unit. The location of the crank position sensor is near the oil filter
Question about Chevrolet Cavalier
...crank position sensor is on a 1996 Chevy Cavalier 2.4 LS. Try this. The Crankshaft Sensor looks like this, ...
...crank position sensor Side of the engine next to the firewall. Middle ways of the block just below the coil packs. There are wires that go from coil pack harness to the crank position sensor...hope ...
where is the crank position sensor located on a 2.2? the crank position sensor is located behined the main drive pulley on the front of the engin Still. Can't find it. What size wrench is neede
crank sensor. Hi, the sparks are triggered by the crankshaft position sensor. Check the wiring to the sensor. If good, you might want to buy a new sensor. A new sensor is only about $10. The sensor is
...crank position sensor) and p0341 (cam position sensor) mean on a 1996 cavalier? Was running fine, sputtered for about five seconds, then set the codes. Check engine light turned off after two days. ...
...an also crank sensor no help change air filter, clean all ground wires on engine and spray clean throttle position sensor. after reinstall turn key to on position 3min. then off 3min. this resets ...
...crank position sensor on 93 Chevy Still can't find crank position sensor on 93 Chevy cavalier. Iknow behind pain pulley,in front or back of oil pa? No it's undr the inghtion modiule thats ...
...Crank Position Sensor and the ignition module. What else could be causing it? It is a 2002 Chevy Cavalier with the 2.2 OHV motor. I would say it may be the cam sensor. Test the wires to the sensor ...
...crank position sensor? hello , yes it does . otherwise known as the CKP a picture of its location is this link . ...
2,263 questions posted
Usually answered in minutes!
1,849 Questions
1,529 Questions
1,438 Questions
1,339 Questions
1,200 Questions
