1994 Chevrolet Camaro "fuel hose replace steel line" Questions

...fuel lines and use hose clamps and rubber fuel lines to put it back together . It wont work on a 4th gen unless you cut a huge hole . Its a total barefoot redneck way to do it . Ive changed 4 in my ...

fuel line hose to replace entire line... NOT necessary..old school repair if fine replace line is $$$ and not neccessary very little pressure in fuel line mostly gravity flow you may even say its more

...fuel line is a short rubber hose, or a steel line all the way from the fuel tank. Most dealers charge form $80 to $100 per hour, plus the fuel line and other parts costs. A short rubber hose cost ...

...fuel pressure blowing hoses off connections if you cut steel lines to fit rubber hoses . the hose has to have a pressure rating of 150 + psi , the steel lines ends will have to be flared so that the ...

...tubing and hose clamped a section of rubber fuel line to replace the steel line I removed. I've never had a problem with engine starts since doing this repair. Hope this helps you out. Regards ...

...fuel lines? The hose goes between the frame and body of the car I can not pull or push them out, so how are you suppost to do it? Step 1-Determine type of fuel line to be replaced. Rubber hoses will ...

...fuel hose that goes along the floor of the vehicle hopefully there is a place to unscrew stock unoin and replace the line or remove to repaire with said flaring tool and coupler. PS follow the ...

...Plymouth Acclaim On a 1993 Plymouth Acclaim, I already replace the rubber hose from the fuel filter to the steel fuel line and it is still leaking? check to make sure hose clamps are tightened ...

...fuel line. thinkin about cutting off a 4-6 inch section and replace with rubber hose and locks. WHAT TYPE OF LINE STEEL OR PLASTIC, IF PLASTIC IT WILL REQUIRE A SPECIAL REPAIR KIT YOU GET FROM PARTS ...

...fuel hose secured with hose clips were being replaced by push on/quick release connectors sealing with an internal O ring. If the fuel lines are steel there will still be short lengths of hose used ...