2001 Pontiac Grand Am SE "manifold" Questions

...hose from the thermostat housing for more complete coolant drain.Remove upper and lower exhaust manifold heat shields.Remove the bolt that attaches the exhaust manifold brace to the

...Drain and recycle the engine coolant. Disconnect the oxygen sensor wiring. Remove the upper exhaust manifold heat shield. Raise and safely support the front end of the vehicle securely on jackstands. ...

...intake manafold? The torque specification is a 2-step process; tighten the vertical lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake

...leak. Look for a loose a throttle body, loose, missing or damaged hoses, loose or missing intake manifold bolts or any other opening in the intake manifold. P0105 - Manifold Absolute ...

sensor harness connector Raise the vehicle and support it securely on jackstands Remove the exhaust manifold brace and loosen the exhaust manifold bolts Remove the radiator outlet pipe assembly to the

...of the 3.1 engine of the 1997 Pontiac Grand Am? I dis-assembled my engine and removed the intake manifold. On the driver-side of the engine, the manifold does not match the shape of the mating ...

...P0 134, o2 sensor, No Activity, bank 1 sensor 1....are there two sensors, one at the exhaust manifold and one by the catalytic converter? I see what appears to be one at the exhaust manifold ...

...noise. It sounds like a turbo. The fast I go the more high pitched it gets. Its probably an intake manifold leak or a dry belt. check the dry belt by physically looking at the belt at look for

...we can send instructions if you want to DIY. If this is a V-6 car, the leak is probably the intake manifold gasket where the head and manifold meet. Pressure test the cooling system and watch at the ...

exhaust manifold if my exhaust manifold is cracked what does it do to the motor? A cracked exhaust manifold should not effect your motor unless you have an exhaust driven turbo or something depending ...