1997 Pontiac Grand Prix "remove steering wheel" Questions

Ad

...remove steering wheel how do i use a steering wheel puller to remove steering wheel Ok, after you remove the pad in the center of the steering wheel, you will see a large nut in the center with a ...

Ad

Question about Pontiac Grand Prix

2 Answers

...steering wheel. remove the ignition lock and test to make sure it is working correctly. if the lock is working properly then the issue is in the steering columns wheel lock mechanism. but 9 times out ...

Ad

...remove Pressure on the Steering Lock Pawl. Usually this occurs when turning off the Key while Pressure is Applied to the Steering Wheel from a slight "Roll-Back" or from the Power Steering being ...

...Remove the tie rod ends from the steering knuckles. Caution: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or ...

Question about Pontiac Grand Prix

2 Answers

...remove the power steering pump on a 2006 pontiac grand prix 3.8L Power Steering Pump Replacement Removal Procedure 1. Remove the accessory drive belt. 2. Raise and support the vehicle. Refer to ...

Question about Pontiac Grand Prix

1 Answer

need to replace turn signal switch and cant get to it steering wheel in way. it is possible that you may have to remove the steering wheel......cheers.

Question about Pontiac Grand Prix

2 Answers

...Remove the power steering mounting bolts from the power steering pump. 8. Remove the power steering pump from the engine. 9. Remove the power steering pump pulley from the power steering pump. 10. ...

...steering wheel need to be removed to replace the multifunction switch (turn, cruise, washer, wiper, hazzard, combined)? There is a cowl around the column that looks like it comes apart. Can you help? ...

Question about Pontiac Grand Prix

1 Answer

...steering wheel of the shaft and have all the ring off the the nub that steers the car theres a metal house around it and dont know how to removie it. There arent any screwes and no way to pull it off ...

...steering knuckle. On some models, it may be necessary to remove nut attaching link to stabilizer shaft. 5. Locate center of rivet body and mark with a center punch. 6. Using a 1/8 inch drill, drill ...

Not finding what you are looking for?
1997 Pontiac Grand Prix Logo

1,264 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...