1997 Pontiac Firebird "crank sensor" Questions

...3.8L,where is it located? The crank sensor is on the front of your engine behind the harmonic balancer. You will need a balancer puller for a 3.8 and a crank sensor alignment tool to do this

...crank sensor gone bad. I need to see a pic or diagram of its location to replace it. it's usually on the front of the engine by crank pulley, cylindrical with one wire coming off it. Points at the ...

...crank sensor''' its not there? it acts like a bad crank sensor'''but I cant find one''i looked the whole motor over''its not there? I found a knock sensor'''can u give me anymore insite on this? its ...

...crank. I had went to the store to get more gas to see if thats was the problem and it cranked right up. I drove it down the road but acted like it didnt have any power. Now it spits and sputters when ...

...crank sensor camsensor and when we go to crank it it will turn over but not crank its not getting fire to the plugs have to be more specific in your description. Turning over and crank are the same ...

cranks over and back fires car won't start, cranks over and backfires check crank sensor often times they go bad and wont set codes Timings off how do i check the timing

...spark to the plugs Check for rpm signal, see if the tach moves when you crank it over, if not you have a bad crank sensor, it is located by the crank pulley, otherwise may have a control module

...with mine. I have a 91 trans am, and My problem was a temp sensor on the motor. I put a new one on, and it fired right up. Hopefully that helps you out a bit. check your crank /cam or knock ...

find crank senor cant find it on motor What engine? im pretty sure the 5.0 and the 5.7 do not have a crank sensor. The 3.1 has one. It will be on the passenger side of the block.

...crank sensor) to determine spark timing. If sensor malfunctions, you will get no spark.
You should also check for trouble codes. Post back if you don't know how. It just takes a short jumper wire ...