1999 Nissan Maxima "remove back seat" Questions

...Remove rear seat back by tilting forward and pulling straight up. To install: Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm). Install the ...

...remove back seat in a 1995 Nissan Maxima Rear See Figures 3, 4, 5 and 6 Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward ...

...back. Remove the seat back. Remove the large metal support panel that is behind the seat back. Safely jack up the rear of the car and support on jack stands so the rear wheels hang free. Doing one ...

...Remove the cover from the the far back, between the back of the rear seat and the trunk space. Remove approximately 4 to 6 screws in the center piece of cardboard that attaches the armrest and ...

...Remove bolts, unplug any power connections , seat should come right out. There are four bolts holding the chair to the floor, maybe a couple wires attached, but you might find the ring before taking ...

...remove the bolts and lean the seat back check the wires going to the motor and make sure it has power going to it.Don't know of any way to manually recline the seat without taking it apart. What do ...

...maxima i need to put some new shocks on the old nissan but i have to get the back seat out, so can someone please help look behind the arm rest pull the 2 plastic tabs out and remove the 2 10mm ...

...remove the backseat of my Nissan Maxima-2007 3.5SE..I dropped a small ring down the back of the leather seat..I have tried to use a vaccum , no luck.. Typically, seats jamb fit at the rear and have a ...

...Remove Rear seat? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html---------second row seat will not fold? ...

...inbetween the back seat and trunk it is held on by 4 philips head screws..you must remove the back seat ..top and bottom to get complete access to the panel.There is no need to drop the fuel tank