1995 Nissan Maxima "truck 2 timing" Questions

timing right so it can run Let's make sure the Firing Order is correct first: For the 3.0L V-6: Firing Order: 1-2-3-4-5-6 Cylinders: (back of engine) 1------3-------5 2------4-------6 (front of engine

...2 and #3). I took it back down. Then the second time one cylinder (#5) is skipping. Any suggestions? V6 engines (VG30) renowned for breaking exhaust manifold studs. As to the pulley marks, looking at ...

...2 cam timing 40 degrees advanced at idle I have a code p0021 on an 03 maxima, my scanner shows bank 1 timing at 6 degrees and bank 2 at 44 degrees at idle. If I actuate the solenoids manually, they ...

...does it have a timing chain or timing belt? There were 2 engines used. The VG30E(GXE version) and the VE30DE(on the 92-94 SE versions). The VG30E has a timing belt and the VE30DE has a timing

seems fuel injectors are dumping fuel in and flooding.. won't start.. we get spark.. but flooding Over time the injectors will wear and leak . I have seen were after you get it started it is fine but ...

misfire on #2 cylinder reading code 1320 installed new plugs, and new coil pack on #2 but still misfire It's possible the fuel injector went bad on that cylinder. My maxima did the same thing until I ...

...timing chain should last a few hundred thousand miles. There is actually 3 chains. they could run about 2 thousand dollars to replace. You will know when the time comes to replace them. Balance the ...

the battery keeps dying after a period of time you will need to put a volt meter across the battery terminals. just over 12v engine stopped. 13.5-14v engine running. if you get the 13.5 then the car ...

My 2001 Nissan maxima has the service light on. My 2001 Nissan Maxima has the service light on. the service guy told me it was the bank #2 O2 or knock sensor. Where is this located? it's located at ...

after replacing an oxygen sensor, how can i reset after replacing an oxygen sensor on a 2000 Nissan Maxima, how can i reset the service engine light or will it reset by itself? U can reset the light ...