1987 Nissan Pickup "harmonic balancer" Questions

...harmonic balancer off will I have to time engine again? No, re-timing your engine would only be necessary if move the distributor. The Harmonic Balancer is aligned to the crankshaft by a keyway. In ...

Harmonic balancer on a 1997 Nissan Pickup 4 cylinder I have a 1997 Nissan pickup. Can I replace the Harmonic Balancer with a 1995 Balancer? Hi Cecil,got a 85 Nissan 720 4x4,had it 20 years,to find out

...harmonic balancer what size is it? Why did it come off? I have seen this and you can be glad if the balancer didn't move and damage the crank or t-belt area. Get another bolt and torque it

...harmonic balancer. The 2.5Liter engine should be set to between 5 and 8 degrees BEFORE Top Dead Center. (BTDC) The 3.2Liter should be set to 3 to 7 degrees BTDC. This is just Base Timing. Don't worry ...

...harmonic balancer? Same happened to me. Economic way to ensure its at tdc is to remove #1 plug, using a thin dowel rod mark the distance it travels inside spark plug hole. Turn crankshaft slightly ...

which way to turn the harmonic balancer when changing oil seals Why do you need to turn it? You need to pull it off with a puller.

front crankshaft seal on 1987 Nissan PU, 4 cyl. 4X4. D21 When I did mine I removed the belts, removed the harmonic Balancer and used a seal puller to pull the seal out and then pressed the new seal in

...noise when i start it. I replaced all belts before replacing the waterpump, Harmonic balancer and after. have u checked timing belt? or plainly the tetion ratios are correct hot/cold running ...

harmonic balancer bolt which way do you loosen the bolt on a 1994 toyota truck Turn the bolt counter clockwise. It is probably a very high torque bolt, p in excess of 200 foot pounds. A 1/2" breaker ...

...Harmonic Balancer off ???????????????? remove the bolts and use a puller to remove it. Auto Zone rents tools i think its a 1 1/4 socket take off bolt put a puller on and take it off it might be a ...