1999 Pontiac Grand Am GT "ignition lock cylinder won 39" Questions

...key tumblers and ignition lock cylinder.These cars are known for faulty ignition switches and ignition lock cylinders.Ignition switch gets to hot then it won't start until it cools

won't start until cold again Sounds like you might have a faulty ignition switch and ignition lock cylinder.These cars are known for the ignition switches getting hot and then they won't start

...a switch. BUT it comes as two different pieces. A mechanical lock cylinder and the electrical pigtail that mounts to the back. You will be replacing the electrical pigtail for the ignition ...

ignition switch-the electrical part, not the lock cylinder. When key is in the on position (run), those fuses should be powered. Are all the maxi-fuses good? They distribute power throughout the car's

...ignition switch,instrument cluster,lock cylinder,and pcm. If you have a non factory key? The car will not run. It will start and die after runing 3 to six seconds. A lot of times the small wires in ...

...ignition wont lock in place,just redo it but this time you need to realize that you install the key cylinder with the key in the ON postion,straight into the lock cylinder housing,aligning the ...

...ignition lock cylinder... all of the accessories are on... the key won't move to the start engine position, well it does, but won't start the van. the key turns all the way on and all the way ...

...Ignition Lock Cylinder P1610 and P1614 Keys won't turn for Lock Position on Ignition Lock Cylinder Not sure what the problem here is.The codes are for the security system - - the key is not ...

The car won't start. And I can't get the key out of the ignition. Likely a worn or damaged ignition lock cylinder,tumblers getting jambed inside.New lock cylinder required.

...ignition lock cylinder or faulty ignition switch.I suggest re-inspect the new ignition cylinder. For more help,click the help link mentioned below:----Ignition Switch Will Not Turn Off? ...