1984 Pontiac Grand Prix "distributor installation" Questions

...on with the marks facing each other ,you should not have to adjust the timing.but if you moved the distributor .then you have to retime the

...3.1 liter will fire off but not run Timming not set right restab dist. HI,OK SINCE THE 3.1 HAS NO DISTRIBUTOR ,TIMING PROBABLY ISNT THE ISSUE. DOUBLE CHECK THE FOLLOWING: FIRING ORDER.SPARK PLUG ...

...KNOW WHAT YOU FIND. A friend had a toyota which did the same. The problem was the coil inside the distributor. once he replaced it all was well. The problem was the coil leaking and getting hot and ...

when shifting from second to thrid it has a skipping or bucking.drop transmission pan,no metal or shavings in pan You should have the computer scanned at a transmission shop or a dealership. If you ...

...distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the ...

...Distributor Removal and Installation REMOVAL Remove bolt holding air inlet resonator to intake manifold. Loosen clamps holding air cleaner cover to air cleaner housing. Remove PCV make-up air hose ...

...Distributor installation for the 1990 1.8L engine Fig. 7: Distributor installation for the 1992-93 1.8L engine Install the distributor into the engine, while aligning the fine cut (groove or ...

...distributor from the engine. INSTALLATION Engine Not Disturbed Install the distributor in the engine making sure that the matchmarks are properly aligned. Install the hold-down bolt and tighten the ...

Need firing order on 96 Chevy Silverado and how to place the distributor HOME REPAIR HELP PRODUCT AND HOW TO INFO D DISTRIBUTOR REPLACE Distributor ABCDEFGHIJKLMNOPQRSTUVWXYZ Inspect/Replace To Remove

...Installation of distributor Before installing distributor, visually inspect distributor. Inspect O-ring. It should fit tightly and be free of cuts. The drive gear should be free of nicks, cracks and ...