...on ck engine light on throws dtc codes P0600, serial link malfuction dtc code P0720, output speed sensor malfunction. Car goes into limp mode whenever lites come on -could take as much as 5 ...
Vibration from under car CLK 320 At certain speeds there is a vibration from under the passenger footwell that transmits to the rear of the car. All wheels have been tracked and balanced.It was ...
Question about Mercedes-Benz CLK-Class
...DRIVING. WINDOWS GO DOWN AS MANUAL STATES THEY SHOULD. The top should not work above a certain speed or at all if the vehicle is moving. The top can easily rip from the wind if deployed at ...
02 mercedes clk430 stuck in limp mode. Transmission has been rebuilt, we have no power to the speed sensor, we changed the connector plate and the car is still in limp mode what can be wrong? all ...
how to turn off ESP light on my clk It will need to be scanned for fault codes. most likely and wheel speed sensor fault in this age of car.
rotate. replace battery, all light on when ignition is turned to start. fan blower comes on to full speed. no ignition YOU COULD HAVE POOR BATTERY GROUND CABLE.YOU COULD HAVE FAULTY STARTER OR STARTER
...fuel pressure include:
- loss of power
- acceleration problems
- engine sputtering at high speed
- engine not starting
- engine stalling
- problems starting the ...
...it was wiring on common rail but did not work . Seems to happen only when car is hot or got up to a speed of 130 km plus. Won't happen if just driving around town. if the car was pluged in and no ...
...Tcc, or transmisson control module is what pops into my head, but the codes state that:. p2767 = speed sensor a....p2768 speed sensor b or Torque Conv Clutch
123 questions posted
Usually answered in minutes!
66 Questions
84 Questions
61 Questions
6 Questions
2 Questions