2001 Chevrolet Suburban "replace thermostat" Questions

i have a 1993 chevy suburban and just replaced the thermostat, because addmissions wants the surburan to run no higher than 160f . Well the thermostat works but dosen't kick in untill it reaches 2

new gasket (or RTV gasket material) put in new thermostat (spring down) and replace bolts. Do not over tighten and torque down each bolt alternately using approx the same force you used to remove them

...replace a thermostat on a 1986 suburban when you're facing the engine its the biggest hose on your left going from the radiator to the intake manifold undo the hose clamp on the hose connected the ...

...260. How do I reset it? you need to replace the thermostat and gasket,for some reason your engine is over heating,check to make sure fluid level is full ,and cooling fan is turning on by 212

...blower is turned down. Van has good heat but is getting me worried. Could the thermostat need to be replaced? jt\\it could be the water pump or the thermostat giving you ...

...Replace thermostat, radiator cap (if radiator is still good) 3. Replace water pump; the water pump may have stopped working (mechanical), which in turn caused the pressure to build an blow the head ...

...replace my thermostat on my 1997 suburban - 1500 engine is 5.7 vortect no sure where this is located If you follow the upper radiator hose from the radiator it will lead you to the thermostat housing ...

the heater is not blowing hot air like it should the heater core has been replaced just blowig cool air First check your coolant level if your coolant is good then it is probably your thermostat. If ...

...holes first then tighten the hose clamp. If it still leakes then remove the hose from the thermostat housing and replace both the thermostat and the thermostat housing. Any more questions please

...to pull out and heat water up to the temp of your thermostat and drop it in water if it opens then it is good. but with all this trouble it is easier to just replace it since you will have out