1998 Chevrolet Corvette "light bulb" Questions

bulb then you have a ground problem. just remove that blinker light and check the ground wire on it. if you need to replace it and find a good groun on the car. you should be fine. this is all it is .

bulb replacement, reach from under the vehicle. To remove the inner rear brake light, you must reach behind the license place and under the vehicle to access the bulb and socket Remove the socket from

dash lights socket is hot but bulb will not light Instrument lights are out the socket is hot but the bulb will not light. Check the ground side of the circuit. Through the circuit board and to ground

bulb Hood light burned out. Where can I find the bulb and then replace it? Any parts store should have it. It could be a 1156 or sometimes it has a small plastic cover that prys off, and then you will

...light to get to the bulb. Reverse instructions to install. [email protected] The rear procedure listed is good, However, the front can be accessed much easier and quicker if you use the procedure ...

light bulb wont come out I have a 1972 corvette one of the brake light bulbs is burnt out and I cant get the bulb out to replace it? Take a small piece of cloth and cover the bulb then squeeze it with

where is the fuse for the lighted mirror in the sun visors? THe sun visors have lighted mirrors. The bulbs are good but lights won't come on. I suspect the fuse but can't find which ...

...the bulb socket with volt meter & getting 12v at socket when depressing brake petal. Still bulb will not light. make sure you have the correct bulb and have it installed in the socket

LIGHT ON 1998 CORVETTE assuming you mean replacing the bulb? about $2.00 a bulb the bulb is push and twist, open the hood and remove the plastic cover then remove the bulb by pushing it down and twist

...bulb works now. but the rear running lights dont work and head lights fuse box under hood looking for blown fuse Get a multimeter check for DC voltage at the light sockets. No voltage means blown ...