1998 Chevrolet Corvette "100 degrees" Questions

Ad

...1998 corvette expell gas vapors through gas cap in temp of a 100 degrees plus I let it cool down and was able to proceed to my destation Failure in Evap System-- a possible place to start some ...

Ad

Question about Chevrolet Corvette

1 Answer

100 degrees 5 Application: Oil for use in temperatures ranging from -13 to 100 degrees Note : Quarts without filter change Oil for use in temperatures ranging from 32 to 100 degrees 5 Application: Oil

Ad

Question about Cars & Trucks

1 Answer

change from farenheit to celcius 1 degree C = 1.8 degree F. 0 degree C = 32 degree F. 100 degree C = 212 degree F.

Question about Chevrolet Corvette

2 Answers

...at home & use the site-- the same as you do FORD FUSION Hybrid (2013-2014) use lugnut torque of 100 ft.lbs. FRONT toe 0.2 ± 0.2 degree caster 3.35 ± 0.75 degree cross-caster 0.0 degree tol. 0.75 ...

...degrees it blows 100 degree air. I have taken it to the Jeep dealer twice and keep getting a run around. It seems they can't or don't want to fix it. sounds like its an air door or vacume problem ...

...degrees AFTER top dead centre then approx 100 yards down the road the car jumps into life and the measure blocks read approx 15 - 25 degrees BEFORE top dead centre ( Normal ), crankshaft and camshaft ...

Question about Cars & Trucks

1 Answer

...FOAM into your tank and driving 100 miles and see if this fixes your Problem. The CAT needs to be at least 100 degrees HOTTER in the REAR. This will CLEAN the CAT and quite possibly fix your ...

...plug on the right side of the transmission that has to be unscrewed and when you reach 100 degrees the fluid shoud be pouring out. If it needs more is will have to be pumped in. Dexron six works

Question about Cars & Trucks

1 Answer

...not exceed 200, 220 max. Or just 100 degrees over the outside temp, like 87 degrees out, your car should be running at 187. Until you stop at a light and it idles for a minute, then it will

100 percent sure). Cylinder head, torque to 19 nm, loosen 90 degrees. Retighten to 29 nm. Paint spot of white paint on front of bolt head and tighten additional 90 degrees and then another 90 degrees

Not finding what you are looking for?
1998 Chevrolet Corvette Logo

224 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...