until fluid runs out the side hole. Replace the plug and the fill cap when done. there is a dip stick under the hood jimmie.. but if it is a standard transmission it is a fill bolt on top of the trans
...fill cap . there where you put your fluid at using a long funnel . in order to check fluid the car is going have to be lift level . with all four wheels off ground. to access the check plug on ...
...fill plug. The engine will need to be running when you remove the fill plug. I will warn you that it is common for the nut for the fill plug to break loose inside of the drain pain making it ...
...plug. The higher one is the check/fill plug. The idea is to fill the plug until fluid starts to leak out. No so bad if the plug is 90 degrees to the ground. But not this one. Checking is a messy
Location of oil dipstick on V6 and how do you check auto trans fluid level and fill same? no dip stick. check/ fill plug is under car.
...auto trans dipstick or fill if it has a 4L30 in it it has no distick. the fiter is in the pan. look at the pan it has 2 drain plugs the one position at a higher level is the fill hole the lower the ...
...but I do not have one...I'm sorry. look at trans pan there should be 2 sump plugs in pan one slightly higher than the other, fill till oil just comes out of higher level plug while engine is
fill from which is in middle of engine and trans at front (where engine joins trans) black plastic lock over tang, engine dip stick is yellow. other model transmissions had a filler bolt hole which is
...location of the drain plug. You will need to drop the trans pan to drain. In turn you will need a trans filter kit which will include the filter and gasket. As far as fluid, it will require mercon ...
...location was found by reading up on the transaxle information from the link below. ...
976 questions posted
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
830 Questions