...fuse is blown replace. If not fuse go buy a package of brake light bulbs at the auto store. Then replace the bulbs. Hope this helps Matt I have the same problem but the bulbs are fine. The fuses are ...
Question about Chevrolet Avalanche
...light works. Changed fuse, didn't fix it. Hazard lights work (they use same bulb as brake light) Any ideas? Replace the brake light switch located by the brake pedal. That will resolve your ...
...If no power, replace the assembly. check the wiring going to light,wiring running along trunk hinge sometimes breaks, also check all fuses,the third brake light most times is on another fuse
...THIRD BRAKE LIGHT WORKS 99 JEEP BRAKE LIGHTS WONT WORK..THIRD BRAKE LIGHT WORKS..FLASHERS WORK..TURNSIGNALS WORK, EVERYTHING ELSE WORKS...WHATS SHOULD I DO??? PLEASE HELP!!! on chrysler products the ...
...replace one side tail light bulb, and re-check brake light function...these bulbs are multi functional...the brake switch located behind the brake pedal must be OK for the third brake light to remain ...
is no fuse for the third brake light that I know of, it is wired into the main brake light wiring on most cars anyway. Probably the bulb is blown. Try replacing the bulb and then we will go from there
Question about Chevrolet Cars & Trucks
...third brake light works but not the tailights my third brake light is working the tailights are not fuses r good have parking lights and turn signals you have 2 elements in the bulb. One for turn ...
...when you open the door on the driver's side. There is a panel that you remove (pull off) to expose the fuses. The brake light fuse is the third one from the top on the left. 7.5 A replace the ...
...fuse blown. Hazard, turn and running lights work. Third brake light works. if the 3rd brake light works, you know the brake light switch works. not to state the obvious, but have you replaced the ...
813 questions posted
Usually answered in minutes!
538 Questions
445 Questions
356 Questions
231 Questions
97 Questions
