...Look for the Head light low L-R fuse. check if they are blown out. If the fuse is good. check the head lamp bulbs, see if they are still okay. I hope this helps. Thanks and have a nice day. ...
...good. High beam works parking lights work and fog lights work My guess is the turn signal/multifunction switch. All your light go thru here. except the third brake light. Here's is some electrical ...
...good, stiil have no low beams only high beams. would both bulbs burn out at the same time? Maybe,check them to see if they did,if they did not,there should be a low beam relay,to check,and if it is ...
...good, no power to drivers side bulb socket when high beams are selected. id just replace the bulb, socket,and your sure you checked all fuses Probably a ground issue,have you tried using a tester to ...
Question about Cars & Trucks
...bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter. Right hand low beam headlight bulb 9006 new. fuse good, blinker ...
Question about Cars & Trucks
bulb is dead. RH low beam works fine & all other lights fine. Low & High beam bulbs are separate bulbs. It does have AUTO light turn on feature that is working & have tried turning on manual, Still no
...terminal. You should see at least 12 volts when you turn on the high beams. If you do, it's the bulbs. If you don't it's likely the switch or the relay (assuming you've verified the fuses are
Question about Ford Cars & Trucks
//www.pirate4x4.com/forum/ford/871218-2004-expedition-headlights-only-one-works-fuse-fine-bulbs-good-wtf.html If lights go out on one side it is usually a bulb, but sometimes could be a wiring problem
...fuse has power on both sides ( with the low beams on ) next you can pull the headlamps, and check for power at the connectors, but depending when the last bulb change took place, I would say you need ...
813 questions posted
Usually answered in minutes!
538 Questions
445 Questions
356 Questions
231 Questions
97 Questions