2000 Chevrolet Impala "abs noise braking chevy" Questions

...system is acting up. and a noise that sounds like it is grunting off and on.I replaced the right front speed sensor and it stoped.A couple of days later it started again. ABS Sensor? Ne SES codes

...abs light and traction control lights come on and the brakes grab suddenly with a grinding noise when pressure is applied to stop. the car has been in the shop 3 times; the left front hub has been ...

...noise, security light as ell comes on battery light too, and outer lights aswell blink off and on , after all that we got an alernator and battery , and the car will not hold a charge ......I too ...

noise, and starts pulsating, and there is a lot of resistance. I just had new brake pads installed. The ABS and Traction Control lights won't come off. What's going on with this car???

...abs brakes pulse and make a noise and seem to try to work even when touching the brakes lightly. It has 170,000 miles. the yellow light is warning you that a problem exsists with the abs. unless you ...

...to this problem. Lights dim for a moment when this problem occurs but come right back when the pedal returns to normal braking and noise stops. abs activating . test abs speed sensors and

ABS light comes on and then shuts off but does it regularly. Also it makes a noise on the front brakes when using them. What could be the problem? One of the wheel speed sensors is going bad probably.

abs light to turn on. The loud noise could easily be your wheel hub going bad. Easiest way to check, jack up the front of the truck, grab tire, shake back and forth and up and down. Same amout of play

...noise just once and then the ABS and Brake light came on. I figured id shut it off and turn it back on again. It did the same thing. So I took it for a drive and everything seems to be working fine ...

...noise was occuring, then you could replace the pads yourself. but the ABS light means that the brakes have some wrong other than just the pads. My truck is doing the same thing, you need to be VERY ...