1993 Buick Riviera "pos touch" Questions

take the pos and neg cable and touch them together and hold for about a minute, then Connect them back, neg.first.then pos, then follow steps above to.relearn. autoshutoff relay may be malfunctioning.

... First - are all the wires connected properly from when you changed the pump? Next - try taking the positive cable off the battery and touching it to the engine or body of the car or the neg post on ...

...touch pos terminal,lights good next touch pos battery cable end, lights good. Next follow pos cable to starter pos terminal,lights good. Next hook test light to bat pos teminal,touch neg ...

...good!!!! Make sure starter end of battery cable is not touching anything else but the mounting post on the starter. Make sure Pos is to pos and neg is to ...

...touch pos lead to ground gauge goes to empty. any suggestions! pos lead is used to measure ground...that means that the power goes through the fuel level sending unit and the ground lowers the power ...

...pos sensor adjustment on 90 olds cutlass ciera 3.3 ,my new balancer is eating them You have got to space it by feel,so it does not touch either side of the reluctor plates,check the balancer reluctor ...

...touch it to pos on the battery it dies like a kill switch Can you break down your paragraph ? Not sure I understand which cable is connected to where. Please be a bit more detailed to give you a ...

touch the pos(red) post of the battery, and ACCIDENTLY touch ANY part of the vehicles METAL parts YOU WILL short out the system, and S P A R K S WILL FLY!!!!!! DO NOT CONNECT NEG.(BLACK) BATTERY CABLE

...touch the other end to bare metal, if it goes to 0, that is ground, if it doesn't move, it is pos. You can test the pos the same way, put one end on the cable and the other in the fuse box, somewhere ...

...touch the other end [while its still touching the pos cable] to the smasll terminal that is closest to the battery pos,there right next to each other. dont worry if somehow you touch the wrong little ...