...of bolt head rotation. Some guys don't fuss with the torque specs and just get them good and tight. Either way, be careful, as the heads are aluminum. You do not want to over tighten these ...
...Torque the bolt to 37 ft. lbs. (50 Nm). Serpentine belt tensioner Alternator to the bracket. Torque the bolts to 37 ft. lbs. (50 Nm). Serpentine belt Alternator electrical connector, lead and nut. ...
bolt torque specs. Torque Specs Database Contact any dealer or parts store. Make sure you get the updated torque specs. They have been changed to help resolve the lower intake manifold gasket failures
...comming loose and i dont know if i should use a rachet and tighten it or what do i need to do Replace the bolt coat with blue lock tite and torque to speck chances are the bolt has heated and ...
torque strut(front engine mounts) .remove one bolt from radiator side of the passenger side torque strut. Use a ratchering strap attach to radiator support and engine lifting eye,rotate engine forward
...housing bolt threads. The thermostat housing bolts Torque to: 18 ft. lbs. (25 Nm) The radiator hose to the thermostat housing The crossover exhaust pipe The air cleaner and duct assembly The ...
...torque wrench tighten the valve cover gasket bolts. Reinstall the spark plug wire harness. Put the alternator brace back into position and tighten the bolt that secures it into place. 5 Reinstall the ...
bolt screws into. Other than that re-install note....just reverse all of the removal instructions to put the new alternator back in. Torque the bolts on the alternator tight! and if you can access the
...axle nut,and rotor. Now you are down to the wheel hub assembly. You will need to remove the three bolts that retain it from the back side of the unit,and then install a hub puller,which you can
319 questions posted
Usually answered in minutes!
601 Questions
450 Questions
394 Questions
322 Questions
268 Questions
