...RESET button located in the driver's side instrument panel fuse block. The CHANGE OIL light will start to flash, press and hold the RESET button again. The reset is complete when you hear the chimes ...
...reset button in the fuse box remove fuse panel left end of dash on driver side.oil reset button button with ignition on position hold reset button in for three seconds. keep doing the procedure until ...
...(engine off) 2. push the reset button in 3. change oil light will start to flash, press and hold reset button again, reset is complete when you hear the chimes sound and the change oil light goes ...
RESET button once. You will now see your Change Oil Light blinking. Hold down on the button until you hear it beep. Turn off your ignition switch. Now start your Alero, the light should be off. Unhook
oil light where is the change oil light reset button on a 2000 alero 3.4L 2 door Driver side. fuse box . take off . there should be a red reset button that looks like a fuse
...and press the reset button in the fuse panel just inside the drivers door once the change oil light starts blinking press and hold the reset button until you hear a chirp sound and the light goes
...reset button. all you have to do is turn the car to when all the lights are flashing and hold the reset button until the car dings. You need a OBDII code reader. A lot of parts stores will do it for ...
...RESET button and release. The CHANGE OIL indicator will start flashing. 2000-03 ? Press and release the RESET button again. 1999 ? Press and hold RESET button until audible chime is heard and then ...
...panel and there will be a red reset button. Turn key to the ON position and press and release button. Press and hold button again, and you will hear a series of beeps signaling that it has been ...
1,875 questions posted
Usually answered in minutes!
1,478 Questions
1,097 Questions
1,065 Questions
830 Questions
662 Questions