...SOCKET SIZE COULD BE 34 OR 35 METRIC 1/2 INCH SOCKET.YOU NEED 1/2 INCH BREAKER BAR.ONCE YOU LOOSEN AXLE NUT A LITTLE THEN RAISE VECHICLE THEN REMOVE WHEEL.THEN FINISHING REMOVING AXLE NUT AND ...
...size sockets ext the right foot lbs of torque for the axel nut, TOOLS YOU NEED IS 35 METRIC SOCKET FOR AXLE NUT.USE 6 POINT SOCKET.DONT USE 12 POINT SOCKET.COULD DAMAGE AXLE BOLT EDGES.MAKING IT HARD ...
...size the star socket would be and if there is such a thing as a "star wrench" Also I need the torque for when we put the new one on. Not 100% sure on size, but ask for TORX socket to fit hub bolts on ...
Question about Dodge Cars & Trucks
...size issue? If it's a chewed out bolt you can get bolt extractor sockets that bite into the bolt head to get it out. ALWAYS replace bolt you take out with these extractors. Are your sockets too long ...
Socket size to remove the rear. Wheel bearing 2002 Dodge caravan with drum breaks The wheel bearing and hub is a single unit on your Caravan. Four 18mm bolts hold the unit to the rear axle assembly. ...
...socket should do this and a breaker bar, once caliper and brake assembly is out the way, you need to remove the holders on the rotor, a pair of needle nose pliers will do it, now you can remove the ...
...wheel and brake caliper. A 36mm socket (may be rented at some auto parts stores) An Impact Wrench for the 36mm socket (air or electric should work) A torque wrench (IMPORTANT!)- the 3 rear bearing ...
Question about Oldsmobile Alero
...wheel bearing assembly on a 2000 grand am Floor jack- jack car up and put a jack stand under it. A tire lug to remove tire. A 36 mm socket to unbolt axle shaft sticking through bearing hub. Next a ...
...size is the read hub bolt on a 2002 ml 320? I am trying to change he wheel bearing but cant get the hub off due to the large bolt. They are Normaly 36mm DEEP WELL Socket Required, if it is THE AXEL ...
Question about Hyundai Cars & Trucks
bolt on the biggest issue with these are taking off the axle nut which requires a decent size socket and a breaker bar or an air gun. Most axle nuts are under pretty hefty torque specs 90+ foot pounds
1,892 questions posted
Usually answered in minutes!
1,272 Questions
1,097 Questions
1,065 Questions
830 Questions
662 Questions