1999 Oldsmobile Alero "size socket need axle bolt" Questions

Ad

...size sockets ext the right foot lbs of torque for the axel nut, TOOLS YOU NEED IS 35 METRIC SOCKET FOR AXLE NUT.USE 6 POINT SOCKET.DONT USE 12 POINT SOCKET.COULD DAMAGE AXLE BOLT EDGES.MAKING IT HARD ...

Ad

...SOCKET SIZE COULD BE 34 OR 35 METRIC 1/2 INCH SOCKET.YOU NEED 1/2 INCH BREAKER BAR.ONCE YOU LOOSEN AXLE NUT A LITTLE THEN RAISE VECHICLE THEN REMOVE WHEEL.THEN FINISHING REMOVING AXLE NUT AND ...

Ad

...SIZE SOCKET I WILL NEED FOR THE BIG NUT ON THE END OF AXLE SHAFT TO CHANGE A FRT HUB ? ALSO NEED TO KNOW WHAT SIZE WRENCH FOR THE CALIPER BOLTS. THANKS Size 36mm.socket for the axle nut and a 18mm ...

socket head bolt. Get the old axle assembly out, put the new one in, install the triple square bolts to the proper torque (look it up....there are two sizes bolts and the torque is different), put the

...ratchet, needle nose pliers to remove axle nut cotter pin, 14 mm for brake calipers, not exactly sure what the tie rod bolt size is, but it would probably be in a metric socket set if its not a ...

...info generic answer --unknown axle nut size but get a socket and remove it --then get unknown socket and remove 3 or 4 bolts holding hub remove hub and if have abs disconnect --pry or unbolt c/v ...

Question about Oldsmobile Alero

2 Answers

...SIZE TORX SOCKETS.YOU NEED AXLE SOCKET AND BREAKER BAR TO REMOVE AXLE SOCKET SINCE ITS ON TIGHT ABOUT 189 - 254 FT LBS.WHEN YOU BUY NEW HUB BEARING YOU HAVE TO REPLACE THE AXLE NUT AND THE BRAKE ...

Question about Oldsmobile Alero

1 Answer

...size Have the same make, model and year..just replaced the front strut and to remote at CV bolt, you need a 24, 25 or 26mm, depending on where your EOS was manufactured. It's gonna fight u so I ...

...size socket for the wheel bearing locknut the axle nut should be a 36mm will also need a 17mm to remove three bolts holding ball joint to control arm and a pry bar to pop axle out of transmission. if ...

Question about Oldsmobile Alero

2 Answers

...size bit it is by heart. Need an air gun to remove the wheel lug nuts, and then the center bolt from the axle. (think its 32mm) Then with ur torx bit, remove the 6 bolts around the axle, they are ...

Not finding what you are looking for?
1999 Oldsmobile Alero Logo

1,892 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...