Question about Oldsmobile Aurora
...outside door handle on 97 528i My handle snapped off, I would assume from the cold. I have a new handle but not sure how of the steps needed to replce it. Any help would be appreciated On your door ...
Question about Oldsmobile Aurora
...outside handle but not the inside handle/? I believe the rod that attaches to the inside handle is broken. probably not the rod(its made of steel) mostlikely the handle broke on the inside of door ...
...outside RR door handle wont work, but I can open it from the inside. Have already removed the interior door panel & handle, the rods were clipped in place properly & function when pulled by hand but ...
...remove the wires from the outside mirror adjustment switch. Remove the 2 screws from under the armrest/door pull and pull the top of panel away from the door. Once the top of the panel is about 8 ...
Question about Oldsmobile Aurora
Outside handle flops around; inside handle won't open door. How can I get the door to open so I can replace parts Try a slim jim first, down the side of the window. Or AAA or locksmith. If no luck
...outside You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you ...
...outside door handle on 97 mitsubishi eclipse On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as ...
remove it and install it into the new handle. Place the rod through the hole and look inside to be sure is will move to the location of the yellow clip.Install the screws from the outside and the nuts
Question about Oldsmobile Aurora
door? I have no outside or inside door handles. I was using long needle nose pliers to grab a rod thru the inside door handle to push back on the rod towards the door jam and the door would open , now
Question about Oldsmobile Aurora
outside of the mirror is a plastic trim cover. Use a trim stick to remove it to allow access to the screws holding the mirror in. Don't unhook them yet. On the inside, remove the plastic trim over the
630 questions posted
Usually answered in minutes!
972 Questions
508 Questions
390 Questions
394 Questions
308 Questions