...foot pounds. Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): Foot pounds (Final torque) Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in ...
...foot-pounds and a second step torque of 80 to 90 foot-pounds each. The rod bearing bolts had a first step torque of 25 to 30 foot-pounds and a second step torque of 30 to 36 foot-pounds. The intake ...
Question about Geo Cars & Trucks
...foot-pounds. The second step is to further tighten the cylinder head bolts to a range of 60 6o 65 foot-pounts. The third step is to finally tighten the cylinder head bolts to a range of 70 to 85 ...
Question about Oldsmobile Cutlass Supreme
...foot-pounds of torque in a crisscross pattern, beginning with the bolts at the center of the manifold and gradually working to the ends of the manifold. Tighten the exhaust manifold bolts to 25 ...
...head bolt torque is measured in foot pounds (ft. lbs) not inch pounds (in. lbs.). Torque cylinder heads bolts evenly; working from the center, outwards. Good luck and keep me informed; if you want
...Foot pounds (Final torque) Final torque must be reached in 3 equal steps. Recheck final torque in sequence. Main Bearing Caps, Torque in sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 ...
Question about Oldsmobile Cutlass Supreme
foot pounds. I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not,
Question about Oldsmobile Cutlass Supreme
...Foot Pounds. (30Nm) (Using the above Torque Pattern) Step 2: Tighten all bolts to 45 Foot Pounds. (61NM) Step 3: Tighten 1 Through 6 <- to 110 Foot Pounds. (149Nm) DO NOT TIGHTEN No.7 bolt yet! ...
Question about Nissan Cars & Trucks
Cylinder head torque settings for a Nissan KA24E engine What is the torque setting for a Nissan KA24E cylinder head? 54 - 61 foot pounds of torque. Be sure to follow the tightening sequence!
Question about Oldsmobile Cutlass Supreme
...a 4 cylinder, no turbo. How many foot pounds do I need to torque the head bolts and in what order should I tighten them? Same question for putting back on my valve cover. WELL HOPE T Notes HIS ...
775 questions posted
Usually answered in minutes!
697 Questions
488 Questions
387 Questions
236 Questions
203 Questions